![Panasonic Kx-tda200 Maintenance Console Panasonic Kx-tda200 Maintenance Console](https://res.cloudinary.com/engineering-com/image/upload/v1434314214/tips/Capture_ojgxm8.png)
The port number should match the port that you have defined within the PBX (2300 in the example below). Add one or several PBX IP addresses here (the IP address of the Panasonic PBX).
#PANASONIC KX TDA200 MAINTENANCE CONSOLE SOFTWARE#
It means that our software will initiate connection with the PBX and the PBX will work as a server. Our software should work in the TCP client mode. (These can be changed at you own discretion, but for this document we will use the default settings.) Note the default SMDR Port Number and Password. Under Print Information select which items you would like to display in the SMDR Printout.ĥ. Installing and starting Maintenance Console. Systems Affected: KX-TDE 100/200/600, and KX-NCP 500/1000ģ. All features and settings of the PBX can be programmed through PC programming with KX- TDA Maintenance Console. SMDR Communication Parameters: CR+LF, 1200 bps, 7 bits, mark parity, 1 stop bit, 66 lines per page, skip perforation 0. Duration time count star mode: instantly (can be configured in the software) The programming switch is located on the PBX unit - open the cover and you'll find it and move it to programming mode. Move the programming switch to the original position choose account code report to be code or index. RS-232C Communication Parameters: CR+LF, 9600, 8 bits, mark parity, 1 stop bit. If you don't know the password then please contact the supplier. Press *#xxxx where xxxx if the password for programming. Go to the main console (Extension 101) and put it to programming mode by moving the switch on the phone to programming position. Open the KX-TDA Maintenance Console and go to:ĪRS Dial (Automatic Route Selection): Dial after ARS Modificationĭate Format: YY-MM-DD - named as international formatĬhange the date and time to current ones.
![Panasonic Kx-tda200 Maintenance Console Panasonic Kx-tda200 Maintenance Console](https://www.pbxdom.com/wp-content/uploads/2015/09/1432720306_panasonic-tda-LAN-PORT.jpg)
Note: Our data logger cannot capture SMDR data through a USB port. Default programming code for panasonic is 1234 or 0000 or 9999.